Craft Resin is Non-toxic, No VOCs, No solvents, Odorless, Non-flammable, Non-hazardous
Cures clear to a glass-like finish. Stabilization additives provide long-term clarity
Craft Resin is self-leveling epoxy, its 1:1 mixing ratio, simply mix 2 parts by volume
Designed to look gorgeous and be strong and durable. Clear, Glossy, Shiny, Thick, Solid, Pro.
Pour equal amount of clear casting resin and hardener into a mixing cup (e.g. 100ml + 100ml). We recommend to use Gloves while doing your project.
Stir well your equal amount of clear casting resin and hardener for at least 3 minutes. Scrape the bottom and sides to ensure the entire mixture catalyzes and that there is no remaining unmixed clear casting resin or hardener stuck (failure to stir properly will result in a sticky resin that will never cure).
After making sure you mix well clear casting resin and hardener together, pour it over your work/project. It will start filling on its own and you can spread it, then just use a brush to
tidy it up. You may notice that the bubbles begin to rise to the surface, many of them
will pop out on their own, but you can also do it yourself for a flawless finish.
Clear casting resin should be kept in a dust-free environment for several hours while it cures. It will become tacky after about 1-2 hours, but you can apply a second coat if
necessary. It will feel dry to the touch after about 12 hours and 99% hardened after 24 hours.
To reuse mixing tools, wipe them off with a paper towel before the resin dries.
Clear Casting Resin For Beginners Resin Kit includes a Stirring Stick and Gloves
Premium Quality mixing clear casting resin can be used in all your project’s needs. An ingenious product formulation and proven techniques will get you results that you can be proud of.
Create anything you want!
River table, painting, cheese board, canvas, coasters, jewelry and much more…
To warm the clear casting resin kit you can submerge it into a bowl full of warm, not hot, water. Or place it a couple of feet from a heater on low for a couple of minutes.
Measure equally and accurately by volume, not weight. Adding too much of either the epoxy resin or the hardener will alter the chemical reaction and your resin will not cure properly.
Stir your equal amount of resin and hardener together for at least 3 minutes. Failure to stir properly will result in a sticky resin that will never cure.
Scrape the bottom and sides of your mixing vessel as you stir to ensure the entire mixture catalyzes and that there is no remaining unmixed clear casting resin or hardener stuck to the sides that may prevent a proper cure.
If bubbles appear, don’t worry—you can get rid of them using a torch later.
When you pour the clear casting resin out of the mixing vessel, avoid scraping the sides in case there is any unmixed epoxy resin or hardener stuck to the sides – if this gets mixed into your catalyzed resin, you may end up with soft sticky spots in your cured resin.
CyBuy – Online Shop provides a thirty (30) days warranty on Clear Casting Resin For Beginners Resin Kit. The warranty becomes effective after the order status becomes “completed”.
Your personal and financial information is encrypted before being transferred to our servers. This encryption meets the highest industry standards and protects your information from loss or misuse.
Before you go, let us offer you a Discount Coupon for your next purchase!
Please wait while we process your payment...
Please wait while we redirect you...